• CCManufacturing0010.jpg
  • CCManufacturing0008.jpg
  • CCManufacturing0005.jpg
  • CCManufacturing0003.jpg
  • CCManufacturing0011.jpg
  • CCManufacturing0004.jpg
  • CCManufacturing0006.jpg
  • CCManufacturing0009.jpg
  • CCManufacturing0000.jpg
  • CCManufacturing0013.jpg
  • CCManufacturing0002.jpg
  • CCManufacturing0001.jpg
  • CCManufacturing0012.jpg
  • CCManufacturing0007.jpg
  • CCManufacturing0014.jpg

Cumberland Container can make it stick with our new Straub Tape Applicators.

  • StraubTaperTwo Tape Applicators have been mounted to our Bobst Expertfolder Gluer (70x137).
  • Currently, they can apply 3/4" tape with a 1" finger lift shield.
  • Applied Tape Lengths: 1" Minimum to 70" +/- Maximum.
  • Run Speeds starting at 3000+ sheets/hr and up to 500 ft tape /min.
  • Can apply multiple pieces of tape per sheet (inline) on multiple style cartons.
    • RSC, Mailers, Five Panel Folders and Specialty Die Cuts.
  • Blank sizes 6x6" to 70x137".
  • Capable of applying 3/4" to 2" wide double sided tape.

aniloxrolls

Cumberland Container has purchased two new Anilox Rolls for our new Apstar 66" x 126" 3 color outside, 1 color inside RDC .   The specialized Anilox Rolls increase Cumberland's ability to print smaller, crisper fonts  (360 lines/inch/5.0billion cubic microns).  The rolls improve our fine line printing and provide a wider spectrum of gradience.   Combined with our recently installed JB Dryer, these specialized Anilox rolls broaden Cumberland's ability to print to Kemi Substrates.

Automatan A+ Litho Laminator

Cumberland Container continues to expand it's capabilities with the purchase of a new Automatan A+ Litho Laminator, set to arrive May 3rd, 2021.

The Automatan A+ Litho Laminator...

  • Applies spot labels as small as 8" x 8"
  • Applies labels up to 66" x 81"
  • Registration within 1/32"
  • Speeds up to 6000 labels per hour
  • Labels Singlewall and Doublewall sheets

 

 

Cumberland Container can make it stick with our new Straub Tape Applicators.

  • StraubTaperTwo Tape Applicators have been mounted to our Bobst Expertfolder Gluer (70x137).
  • Currently, they can apply 3/4" tape with a 1" finger lift shield.
  • Applied Tape Lengths: 1" Minimum to 70" +/- Maximum.
  • Run Speeds starting at 3000+ sheets/hr and up to 500 ft tape /min.
  • Can apply multiple pieces of tape per sheet (inline) on multiple style cartons.
    • RSC, Mailers, Five Panel Folders and Specialty Die Cuts.
  • Blank sizes 6x6" to 70x137".
  • Capable of applying 3/4" to 2" wide double sided tape.

Cumberland Container continues to add new capablilities with the Premier Model 221C Jumbo Auto Feed Partition Assembler which arrived in December 2020.

The Jumbo Auto Feed Partition Assember features include:

  • 30 minute setup times
  • 7-10 partitions per minute run speed
  • MIcro-flute through double wall thickness, chipboard and corrugated plastic
  • partitionsCorrugated max: 50x48.75x20"
  • Corrugated min: 6x6x3"
  • Fiberboard max: 36x36x14"
  • Fiberboard min: 6x6x3"
  • Corrugated plastic max: 50x48.75x20"
  • Corrugated plastic min: 6x6x3"
  • Two person operation

 

Cumberland Container is excited to introduce the Apstar HG2 50" Flexo Folder Gluer to its technology fleet. Installed in April 2019, this performer brings quality and responsiveness with one pass inside 1-color and outside 3-color print capacity. This new technology is perfect for e-commerce and is a cost-efficient way to better deliver your message to your customers.

Our Apstar HG2:

  • Produces final products at a minimum 13.78 x 23.62 up to a maximum 50” x 110” size
  • Prints 3-outside colors and 1-inside color with +/- 0.02" print registration
  • Makes full length in-line die cuts
  • Generates at speeds up to 13,200 boxes per hour
  • Runs Design Style Trays (DST) or Caps/Lids
  • Handles up to 59” x 110" blank through machine on skip feed
  • Can cut 66” length on full die cuts.

Baysek C-170 Flatbed Die Cutter

Cumberland Container's new Baysek C-170 Cutter offers superior performance and versatility. Its single operator efficiency will run 1,800 sheets per hour with clean edges. Its easy tooling and short setup times save customers money and time, giving Cumberland Container an enhanced range of fulfillment opportunities.

  • No trim or angel hair.  Clean, uniformed units.
  • Handles chipboard to double wall sheets.
  • Stacks pieces tightly in each unit.  Can stagger stack units in any increment and automatically insert tie sheets.
  • Runs up to 54 units per cutting die pass.
  • Accepts sheets up to 55” through x 67” across.

The EMBA McKinley 2 Color, 66"x190" Jumbo Flexo In-Line Die Cutter Folder Gluer creates straight, precise, 2 color printing with correctly slotted and die cut sheets that can be folded and glued to produce high quality boxes.

Cumberland Container's  EMBA McKinley Jumbo is equipped with the following features:

  • Precision Pre-feeder – Alliance brand that increases production speeds.
  • Quality Printing – Advanced continuous vacuum transfer and servo-positioned harmonic compensators allow for extremely close print registration; reverse angle doctor blade and 250 line screen ceramic anilox rolls give sharp graphic results.
  • Heavy Duty Slotting Section – Jumbo, single, and multi-wall bulk containers and pallet-size shippers.
  • Massive 30 ton slotting section allows for different calipers of corrugated board from B flute to heavy double wall.
  • Slotting is crisp and exact – gap variations are eliminated.
  • Efficient, high-level performance with consistent quality.

EMBA McKinley Jumbo Specs

Our Revco 1-color Flexo Folder Gluer gives Cumberland Container unparalleled ability to efficiently produce quality triple wall packaging for large-scale and industrial products.  As one of the only machines with triple wall capacity in the Southeast U.S., the Revco makes us uniquely qualified to provide all of your triple wall needs.

  • Capable of skip feeding up to 105"
  • Produces trays and 2-piece cartons
  • Can run sheets up to size 86” x 204”

Revco Flexo Folder Gluer Specs

Martin Flexo Folder Gluer 618 Quatro

Cumberland Container’s Mini Martin gives flexibility to customers needing products up to 25” X 75”. Its 3-color and in-line die-cutting capabilities produces up to 26,000 boxes per hour with very short set up times.

Features of the Mini Martin include:

  • Equipped with a Servo Feeder.
  • 3-color printing with Rapid Fire stations, decreasing set-up times.
  • Vacuum transfer from feeder to slotting section.
  • In-line cutting die with Posi-Lock, ideal for any cutting die attachments.
  • Inside and outside glue capability.

Mini 618 Martin Specs

The BCS AutoBOX is capable of automatically changing styles and sizes, reducing the need for tooling and manual set ups. Using Quick Set UP technology and touch activated screens, the box style and size are easily entered and stored so that we may create a multitude of boxes with little setup time and no expensive cuttings dies to purchase. The versatile AutoBOX runs different thicknesses of corrugated with ease, from E-Flute to Triple Wall using a fraction of the energy traditional box making machines use, saving you further production costs.

Features of the AutoBOX include:

  • Capable of running small to large quantities.
  • Produces one or five panel folders (OPF's or FPF's) without tooling.
  • Has 2 sections for 8x8 cutting die attachments.
  • Capable of continuous printing through the carton.
  • Produces multiple partitions from one blank with 3/8" slot.
Cumberland Container 50th Anniversary
Phone: 931-839-2227
Toll Free: 800-734-7976
Fax: 931-839-3971
1027 North Chestnut Street, Monterey TN 38574

Contact Cumberland Container

stock boxes